Buffer

Modbus DH+ Gateway

DH to Ethernet ConverterMGC2200-DHMOD

$1,250.00

Modbus to DH+ Network (Modbus to DH+)

The Multigate Communications MGC2200-DHMOD provides high speed interconnectivity between an Allen-Bradley DH+ and a Modbus network. The -DH+/Modbus can be any station on DH+ and can be set to either Modbus Master or Modbus Slave. Master mode enables any DH+ station to read / write up to 100 words (per message) to any 4xxxx or 0xxxx register, and to read up to 100 words from the 1xxxx and 3xxxx registers at any Modbus Slave address from 1 to 255. Slave mode enables a Modbus Master to read or write up to 1600 coils or 100 registers (per message) to bit or integer files in any PLC-5 station on DH+ (except 0). Modbus commands to address 0 can be “broadcast” to a selected range of DH+ stations.

Order a multi-protocol gateway now!

Modbus Plus Connectivity:
Provides an interface to Modbus Plus via a Modicon BM85 Modbus Plus Bridge/Multiplexer

Multiple Modbus Protocols:
Master, Slave, RTU and Ascii

Compact and Lightweight:
Small footprint for easy installation

Flexible Serial Interfacing:
RS232C (RS422/RS485 options available)

Easy Configuration:
All parameters are menu-driven

Fastest Throughput:
Serial communications at up to 230.4 Kbaud

Specifications:
Physical Dimensions
Size: 0.90″ H x 4.65″ D x 3.98″ W (22.8mm x 118.3mm x 101.0mm)
Weight: 0.66lbs (0.3kg)
Power: 9-27 VDC; Less than 2 WattsInstallation
Plastic enclosure; Freestanding or DIN rail mounting with integrated clipEnvironment
Operating: +32 F to 122 F (0C to +50 C)
Storage: -40 F to +185 F (-40C to +85C)
Humidity: 5% to 95% non-condensing

Protocols

A-B Channel: Allen-Bradley Data Highway Plus or Remote I/O
Ethernet Channel: TCP/IP – 100-Base-T
Serial Channel: DF1 Communications
A-B Channel: Synchronous, DH+/RIO at 57.6, 115.2, and 230.4 Kbaud Ethernet Channel: 100-Base–T; TCP/IP
Configuration
Integrated web server for configuring communications parameters.Indicators
Power
DH+ status
Serial Status
Serial RX
Serial TX
Ethernet Activity
Ethernet Link Pushbuttons
Reset
ConfigurationHardware
Connections – Top
- 3-pin power – 3.81mm pitch removable screw terminal plug
- 3-pin A-B DH+/RIO – 5.08mm pitch removable screw terminal plug
- RJ45- EthernetConnections – Bottom
- 5-pin RS485/RS422 – 3.81mm pitch removable screw terminal plug
- D9 – RS232 port
- USB